OVERVIEW

Model Name SK260LC-9
Machine Type
SK260LC-9
STD Bucket Capacity 1.31 cu.yd 1.00 m3
Engine 176 hp 131 kW / 2,100 rpm
Operating Weight 56,890 lbs 25,800 kg

DIMENSIONS

Unit: ft-in {mm}
Arm length Short
8'2" {2.5m}
Standard
9'9" {2.98 m}
Long
12'0" {3.66 m}
A Overall length 33'8" {10,270} 33'6" {10,220} 33'7" {10230}
B Overall height
(to top of boom)
10'12" {3,350} 10'5" {3,180} 10'10" {3300}
C Overall width 11'1" {3,390}
D Overall height
(to top of cab)
10'2" {3,100}
E Ground clearance of rear end* 3'7" {1,090}
F Ground clearance* 18.1" {460}
G Tail swing radius 10'2" {3,100}
G' Distance from center of seing to rear end 10'1" {3,070}
H Tumble distance 12'8" {3,850}
I Overall length of crawler 15'3" {4,640}
J Track gauge 8'6" {2,590}
K Shoe width 23.6" {600} / 27.6" {700} / 31.5" {800}
L Overall width of upperstructure
(With Catwalk / Without Catwalk)
9'9" {2,980}
* Without including height of shoe lug

MAIN SPECIFICATIONS

Model Name SK260LC
Machine Type SK260LC-9
Operating Weight lbs {kg} 56,890 {25,800}
Bucket Bucket capacity
SAE heaped cu.yd.{m3}
1.05 {0.80} 1.31 {1.00} 1. 57 {1.20} 1.83 {1.40}
Bucket capacity
SAE Struck cu.yd.{m3}
0.77 {0.59} 0.99 {0.76} 1.10 {0.84} 1.31 {1.00}
Opening width
With side cutter inches {mm}
42 {1,060} 50 {1,270} 57 {1,440} -
Opening width
Without side cutter inches {mm}
338 {960} 46 {1,180} 53 {1,340} 59 {1,510}
Bucket weight lb {kg} 1,540 {700} 1,790 {810} 1,870 {850} 1,960 {890}
Engine Model HINO J05E-TI
Type Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler (Complies with EU (NRMM) Stage IIIB, EPA Tier IV, and act on regulation, etc. of emission from non- road special motor vehicles (Japan))
Rated power output 184 hp {137 kW} /2,100 rpm {min-1} (ISO 14396)
176 hp {131 kW} /2,100 rpm {min-1} (ISO 9249)
Fuel tank 121.5 U.S.gal {460L}
Swing System Swing Speed 10.2 rpm {min-1}
Travel System Travel motors 2 x axial-piston, two-step motors
Travel shoes 51 each side
Travel speed 3.6 / 2.2 mph {5.8 / 3.6 km/h}
Drawbar pulling force 54,900 lbs {244 kN} (SAE J 1309)
Gradeability 70% {35°}
Hydraulic System Pump Type Two variable displacement pumps + 1 gear pump
Max.discharge flow 2 x 65.0 U.S.gph {2 x 246L/min},
1 x 5.3 U.S.gph {1 x 20L/min}
Hydraulic oil tank 44.9 U.S.gal {170 L} tank oil level
74.0 U.S.gal {280 L} hydraulic system

WORKING RANGES

Unit: ft-in {mm}
Boom 19'9"{6.02m}
Range/Arm Short
8'2" {2.5m}
Standard
9'9" {2.98m}
Long
12'0" {3.66m}
A Max. digging reach 32'5" {9.89} 33'10" {10.31} 36'0" {10.98}
B Max. digging reach at ground level 31'11" {9.72} 33'3" {10.14} 35'6" {10.82}
C Max. digging depth 21'5" {6.52} 23'0" {7.00} 25'2" {7.68}
D Max. digging height 31'8" {9.65} 32'2" {9.80} 33'6" {10.22}
E Max. dumping clearance 22'1" {6.72} 22'7" {6.88} 23'11" {7.28}
F Min. dumping clearance 9'11" {3.03} 8'4" {2.55} 6'2" {1.87}
G Max. vertical wall
digging depth
19'1" {5.82} 20'2" {6.15} 22'10" {6.97}
H Min. swing radius 12'10" {3.91} 12'10" {3.91} 12'10" {3.92}
I Horizontal digging stroke at ground level 13'9" {4.20} 17'3" {5.26} 21'3" {6.48}
J Digging depth for 8 feet flat bottom 20'9" {6.32} 22'5" {6.82} 24'9" {7.54}
H Bucket capacity
SAE heaped cu.yd.{m3}
1.57 {1.20} 1.31 {1.00} 1.05 {0.80}

DIGGING FORCE

Unit: lbs {kN}
Boom 19'9"{6.02m}
Range/Arm Short
8'2" {2.5m}
Standard
9'9" {2.98m}
Long
12'0" {3.66m}
Bucket digging force SAE 34,200 {152}
37,500 {167}*
34,200 {152}
37,500 {167}*
34,200 {152}
37,500 {167}*
ISO 38,200 {170}
42,000 {187}*
38,200 {170}
42,000 {187}*
38,200 {170}
42,000 {187}*
Arm crowding force SAE 30,800 {137}
33,900 {151}*
26,100 {116}
28,600 {127}*
22,700 {101}
-
ISO 31,900 {142}
35,100 {156}*
27,400 {122}
30,100 {134}*
23,400 {104}
-
* Power Boost engaged
ENGLISH PDF CATALOG

This page may contain attachments and optional equipment that are not available in your area.And it may contain photographs of machines with specifications that differ from those of machines sold in your areas.Please consult your nearest Kobelco distributor for those items you require.Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.