OVERVIEW

Model Name SK350LC-9E
Machine Type
SK350LC-9E
STD Bucket Capacity 1.83 cu.yd 1.40 m3
Engine 270 hp 201 kW / 2,100 rpm
Operating Weight 81,800 lbs 37,100 kg

DIMENSIONS

Unit: ft-in {mm}
  Arm length Short
8'6" {2.6 m}
Standard
10'10" {3.30 m}
Long
13'7" {4.15 m}
A Overall length 37'1" {11,300} 36'9" {11,200} 36'9" {11,200}
B Overall height
(to top of boom)
11'11" {3,640} 11'3" {3,420} 11'9" {3,590}
C Overall width 11'1" {3,390}
D Overall height
(to top of cab)
10'6" {3,210}
E Ground clearance of rear end* 3'11" {1,190}
F Ground clearance* 19.7" {500}
G Tail swing radius 11'6"" {3,500}
G' Distance from center of seing to rear end 11'6" {3,500}
H Tumble distance 13'3" {4,050}
I Overall length of crawler 16'3" {4,960}
J Track gauge 8'6" {2,590}
K Shoe width 23.6" {600} / 27.6" {700} / 31.5" {800} / 35.4" {900}
L Overall width of upperstructure
(With Catwalk / Without Catwalk)
9'9" {2,980}
* Without including height of shoe lug

MAIN SPECIFICATIONS

Model Name SK350LC
Machine Type SK350LC-9E
Operating Weight lbs {kg} 80,900 {36,700}
Bucket Bucket capacity
SAE heaped cu.yd.{m3}
1.57 {1.2} 1.83 {1.40} 2.09 {1.60}
Bucket capacity
SAE Struck cu.yd.{m3}
1.10 {0.84} 1.31 {1.00} 1.57 {1.20}
Opening width
With side cutter inches {mm}
49 {1,240} 56 {1,420} 62 {1,570}
Opening width
Without side cutter inches {mm}
44 {1,110} 55 {1,390} 57 {1,450}
Bucket weight lb {kg} 2,050 {930} 2,380 {1,080} 2,510 {1,140}
Engine Model HINO J08E-UV
Type Direct injection, water-cooled, 4-cycle diesel engine with turbocharger, intercooler (Complies with EU (NRMM) Stage IIIB, EPA Tier IV, and act on regulation, etc. of emission from non- road special motor vehicles (Japan))
Rated power output 286hp {213 kW} / 2,100 rpm {min-1} (ISO 14396)
270hp {201 kW} / 2,100 rpm {min-1} (ISO 9249)
Fuel tank 153.2 U.S.gal {580 L}
Swing System Swing Speed 10.0 rpm {min-1}
Travel System Travel motors 2 x axial-piston, two-step motors
Travel shoes 48 each side
Travel speed 3.5 / 2.0 mph {5.6 / 3.3 km/h}
Drawbar pulling force 72,200 lbs {321 kN} (SAE J 1309)
Gradeability 70% {35°}
Hydraulic System Pump Type Two variable displacement pumps + 1 gear pump
Max.discharge flow 2 x 77.7 U.S.gph {2 x 294 L/min},
1 x 5.3 U.S.gph {1 x 20 L/min}
Hydraulic oil tank 64.7 U.S.gal {245 L} tank oil level
109.1 U.S.gal {413 L} hydraulic system

WORKING RANGES

Unit: ft-in {mm}
  Boom 21'4" {6.50m}
  Range/Arm Short
8'6" {2.6 m}
Standard
10'10" {3.30 m}
Long
13'7" {4.15 m}
A Max. digging reach 34'10" {10.61} 36'11" {11.26} 39'3" {11.97}
B Max. digging reach at ground level 34'1" {10.40} 36'3" {11.06} 38'8" {11.79}
C Max. digging depth 22'3" {6.78} 24'10" {7.52} 27'6" {8.37}
D Max. digging height 34'0" {10.37} 34'10" {10.62} 35'3" {10.74}
E Max. dumping clearance 23'7" {7.20} 24'2" {7.41} 24'10" {7.57}
F Min. dumping clearance 11'2" {3.40} 8'7" {2.66} 5'11" {1.81}
G Max. vertical wall
digging depth
19'3" {5.88} 21'8" {6.56} 24'0" {7.31}
H Min. swing radius 14'9" {4.5} 14'4" {4.37} 14'6" {4.43}
I Horizontal digging stroke at ground level 14'0" {4.27} 19'1" {5.82} 23'8" {7.21}
J Digging depth for 8 feet flat bottom 21'8" {6.6} 24'2" {7.36} 27'0" {8.23}
H Bucket capacity
SAE heaped cu.yd.{m3}
2.09 {1.60} 1.83 {1.40} 1.57 {1.20}

DIGGING FORCE

Unit: lbs {kN}
Boom 19'9"{6.02m}
Range/Arm Short
8'6" {2.6 m}
Standard
10'10" {3.30 m}
Long
13'7" {4.15 m}
Bucket digging force SAE 45,900 {204}
50,600 {225}*
45,900 {204}
50,600 {225}*
45,900 {204}
50,600 {225}*
ISO 51,000 {227}
56,200 {250}*
51,000 {227}
56,200 {250}*
51,000 {227}
56,200 {250}*
Arm crowding force SAE 44,100 {196}
45,900 {216}*
37,100 {160}
39,600 {176}*
30,800 {137}
33,700 {150}*
ISO 48,600 {204}
50,600 {225}*
37,100 {165}
40,700 {181}*
31,500 {140}
34,600 {154}*
* Power Boost engaged
ENGLISH PDF CATALOG

This page may contain attachments and optional equipment that are not available in your area.And it may contain photographs of machines with specifications that differ from those of machines sold in your areas.Please consult your nearest Kobelco distributor for those items you require.Due to our policy of continuous product improvements all designs and specifications are subject to change without advance notice.